During Enabled,Choose the Date and Time. Thermal Management Allows you to choose the thermal management of your monitor. Wait for five seconds. All hard disks are capable of breaking down at any time. HDD Power Down When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active. However, the color information coming from the VGA controller is drawn from the palette table inside the VGA controller to generate the proper colors, and the graphic controller needs to know what is in the palette of the VGA controller.

Uploader: JoJorn
Date Added: 26 October 2012
File Size: 40.21 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 82212
Price: Free* [*Free Regsitration Required]

The information will be refreshed every 1 second. On Reboots the computer. It’s a community-based project which helps to repair anything. Item Options Date mm: This node records which resources are assigned to it.

Biostar GV Owner’s Manual |

Auto defaultDisabled. We strongly recommend you verify every speed you overclock by click the Verify button. The following table provides more detail about how to navigate in the Setup program by using the keyboard. Disabled default Virus protection is disabled.

Biostar 865GV Micro 478 7.x Free Driver Download (Official)

Every peripheral device has a node, which is called ESCD. Confirmation message will be displayed before proceeding. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click.


This PCI slot is designated as 32 bits. Indicator light on keyboard does not turn on. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure.

Plug in the power cord and boot up the system. When not disabled, imcro of the ranges are from 1 min. However, if any program writes to this memory area, a system error may result.

748 PC Health Status This submenu allows you to monitor the hardware of your system. Hold the CPU down firmly, and then close the lever to complete the installation. Off Leaves the computer in the power off state.

Mainboard Driver: Biostar GV Micro Ver. 7.x

Insert the bootable disk into floppy drive and press Enter. State after power on. Modes 0 to 4 will increased performance progressively. When you see the following dialog in setup procedure, it means setup is completed.

If the following message is shown akdio boot-up the system, it means the BIOS contents are corrupted. Each category includes no, one or more than one setup items.

Related Drivers  HP DV2310US DRIVERS

Biostar 865GV Micro 478 Drivers

IRQ Resources This submenu will allow you to assign each system interrupt a type, depending on the type of device using the interrupt. The BIOS has been recovered and will work properly.

In this panel, you can get the real-time status information of your system. Please download the latest version of Acrobat Reader software from http: Call the drive manufacturers for compatibility with other drives.

Wait for five seconds. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. Onboard Serial Port 1 Select an address and corresponding interrupt for the first and second serial ports.

Enabled defaultDisabled Resume by Alarm This function is for setting date and time for your computer to boot up.