Table Of Contents Integrated Peripherals Expansion Slots Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. You set this value to No to free up an IRQ. Table of Contents Add to my manuals Add. Integrated Peripherals Integrated Peripherals This page sets up some parameters for peripheral devices connected to the system. Refer to the table below for information:

Uploader: Meztirn
Date Added: 17 July 2017
File Size: 59.99 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 96537
Price: Free* [*Free Regsitration Required]

Secure the metal bracket of the card to the system case with a screw.

Create a bootable system disk. If the password has been installed, Installed displays. Below you can find a brief description of each software ecd, and ecs 1333 motherboard location for your motherboard version.

DOC file in the root directory. Look for the chipset and motherboard model; then browse to the directory and path to begin installing the drivers.

ECS 945GCT-M2/1333 Manual

Check the box next to the items you want to install. Install the edge connector of the add-on card into the expansion slot. Ecs 1333 motherboard maintains register com- patibility and software compatibility with Parallel ATA.

Related Drivers  MSI H61M-P20G3 DRIVER FOR WINDOWS 10

Page 51 Click Next. If not, Not Installed displays.

Remove a blanking plate from the system case corresponding to the slot you are ecs 1333 motherboard to mothernoard. Supervisor Password Not Installed This item indicates whether a supervisor password has been set.

Any changes can affect the operation of your computer. Page 12 Memo Introducing the Motherboard Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all ecs 1333 motherboard reserved. Setup Tab Setup Click the Setup button to run the software installation program.

Expansion Slots Expansion Slots Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Page of 52 Go. Operation is subject to the following conditions: It elimi- nates limitations of the current Parallel Ecs 1333 motherboard interface.


Page 21 Table B: Drivers and software are automatically installed in sequence. Got it, continue to print.


Refer to the table below for information: Pin 1 is labeled. Shutdown Temperature Disabled Enable you to set the maximum temperature the system can reach before powering down.

Neither this manual, nor any of the ecs 1333 motherboard contained herein, may be reproduced without written consent of the author. Jumpers with more than one pin are numbered.

ECS > PT-A2/ (V)

Click Next run the Installation Wizard. Ensure that the edge connector is correctly seated in the slot. The following screen appears: Checking Jumper Settings, Mitherboard Jumpers Do not over-tighten the screws as this can ecs 1333 motherboard the motherboard.

By pressing ‘print’ button you will print only current page. You can use the sub menu to change the supervisor password. Follow the instructions on the screen to install the items.