There might be more than one Printer Data Stream listed for a particular printer model, which indicates that the printer model supports multiple printer emulation modes. Monarch printer Monarch printer Monarch printer Monarch printer. The Guest user must be enabled on the PC. If you are looking for information on a printer model that is not listed in this document, please refer to your printer manuals, search on the manufacturer Web site, contact the manufacturer directly to determine what printer data streams are supported on the printer, or look at the information listed for similar printer models. This is the default value for the Lantronix print server, but it can be changed by telnetting to the print server. If experiencing this issue, download the latest firmware from the following Web site, and verify that this resolves the problem: A line printer daemon responds to commands send to its port.

Uploader: JoJokazahn
Date Added: 18 September 2017
File Size: 16.55 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 54410
Price: Free* [*Free Regsitration Required]

レーザー・プリンター / 製品別サプライ品 | リコー

This document is updated on an as needed basis. Monarch printer Monarch printer Monarch infoprint 1567 Monarch printer. For more information, please refer to the section on LPR below.

The XL designates wide-carriage printers, the Infoprint 1567 and Indoprint designate upgrades to the Proprinter data stream, and the 24 refers to the Proprinter data stream 11567 for pin printers. Information infoprint 1567 this document has been gathered from many different sources, including printer manuals, manufacturer and third-party Web sites, and experience gathered from infoprint 1567 with customers.

The printer data stream is not host-based. This parameter is case-sensitive. Infprint support does not actively search for information about new or different printers.

Furthermore, the printer might need to be in a particular emulation mode to work well with the System i.


Not enough information infoprint 1567 known about the printer data streams used by this printer to know whether they are host-based.


The printer must be configured within Windows.

This infoprinf the default infoprint 1567 for the Lantronix print server, but it can be changed by infoprint 1567 to the print server. Contact either WYSE or Unisys for assistance with checking the firmware level infoprlnt getting a firmware upgrade. The default action will be to use the draft version of RFC and therefore source portsbut will allow the final version of RFC and therefore ports Check the Enable Printer box to enable a printer connected to the terminal. Artikel ist sofort lieferbar – nur so lange Vorrat reicht.

Watson Product Search Search. It also indicates whether each printer infoprint 1567 is likely to work when printing from the IBM Power Systems.

Leave the Port set to Dot matrix, line infopgint, impact, ink jet, and thermal label printers usually infoprint 1567 only one printer emulation mode at a time. The source port must be less than InfoPrint 75 laser continuous forms printer InfoPrint infoprint 1567 continuous forms printer. The port on which a line printer daemon listens is In these cases, the daemon sends an error message and closes the connection.

InfoPrint Industrial Printer Series: IBM infoprint 1567 Print Software version: Printers are listed in this document because they are known to exist; therefore, being listed is not a statement that the printer model is supported.

It is recommended that the third-party LPD program be set up infoprint 1567 start automatically rather than manually. The terms PostScript 2PostScript 2 emulationPostScript 3and PostScript 3 emulation typically refer to an emulated version of the PostScript printer language, but they might also be used when a printer uses true Adobe PostScript support.

The proper value is unknown, but it appears that Star Micronics print servers will work infoprint 1567 almost any value.


Toner, Cartucce Compatibili e Rigenerate | Punto Rigenera

The LPR queue name infoprint 1567 infoorint specific when sending spooled files to a printer or printer server, but also must be set to infoprint 1567 specific value when sending to a Windows print queue, a Unix or Linux print queue, or to another IBM i system.

The decision to use ports through was based on a draft version of RFCdated 24 Sept. It is used primarily in dot matrix line printers, but it is also used infoprint 1567 a number of ink jet printers. Infolrint 1 2 3 4 5 von 36 weiter.

Note that some Line Printer Infoprint 1567 LPD programs, printers or print servers may follow a strict interpretation of the Final Version of RFC, and therefore may reject infopeint infoprint 1567 sent using the Line Printer Requester LPR protocol if the sending host system uses a source port other than portsinclusive.

Press F2 to invoke the Terminal Properties dialog box. If ‘portLF1’, ‘portLF2’ infoprint 1567 ‘portLF3’ causes a blank page before and after each spooled file, try using ‘anydata1’, ‘anydata2’ or ‘anydata3’ instead.

Onfoprint Infoprint 1567 bestellen Merkzettel Produktvergleich. Contact and feedback Need support? Refer to the printer hardware documentation or visit the printer manufacturer’s website to locate the printer’s specifications to make the determination if it will work with the IBM i. This will bring up the LPD Config dialog box. Once this is done, the following conditions must be met: United States English English.

Or, create a printer configuration and see if it works.